Product Overview
Pharmaceuticals & Quasi-drugs > Eczema and Dermatitis Drugs > skin softener > Liquid >
Effect
Scholls Wellness Co Dr. Scholl Gel Corn Remover 5g Liquid skin softener Effect
Product Details
Corn Remover Medicated Gel for Corns, Calluses, and Warts is a pharmaceutical product utilizing the keratolytic action of salicylic acid. Its gel formulation minimizes dripping and allows easy application to the affected area. After application, it dries to form a white film, softening thickened, hardened skin to remove corns, calluses, and warts.Before Use To open Gel Corn Remover, follow these steps: 1. Pinch the yellow spacer ring with your fingers and turn it to the left to separate the spacer ring from the tube body.2. Remove the spacer ring by turning it counterclockwise. Keeping the overcap and nozzle cap attached, hold the tube upright and screw the nozzle cap onto the tube without pressing down on the tube body. (The spacer ring can be discarded.) 3. After confirming the nozzle cap is securely attached to the tube body, remove the overcap before use.Pressing the tube body when attaching the cap may cause contents to spill. Example of Proper Gel Corn Remover Usage ~ For Corns ~ (1) Apply an appropriate amount of Gel Corn Remover to the affected area. [Fig.] For best results, use after bathing and thoroughly drying the area.(Bathing or doing water work after application is acceptable.) (2) The solution will dry after a while, forming a white film that allows the medication to penetrate the affected area. Before the next application, peel off this white film. *The white, softened skin will be removed along with the film. If peeling causes pain, do not force it off; simply apply a new layer over the existing film.(3) After applying for 2 to 5 days, gently remove the film and the whitened keratinized area without causing pain. The skin will regenerate, so keep the area clean. (4) If the affected area is not completely removed, repeat the application of the solution. Especially for corns, recurrence occurs unless the core (keratin plug) [Fig.] is removed. Repeat the process as described in (1) to (3).(5) Apply a protective pad to the affected area as needed for protection. For corns between fingers, use a protective pad as needed to prevent the medication from adhering to unaffected skin. Also use the protective pad to alleviate pain in the affected area. *The enclosed protective pad is available separately under the name -Corn Protection Pad [For Between Fingers]-.
View the Medicinal Product Information PDF
Dosage and Administration-Apply an appropriate amount to the affected area several times daily. -Usage Instructions- - For Corns (1) Apply an appropriate amount of Gel Corn Remover to the affected area. For best results, use after bathing and thoroughly drying the area.(Bathing or washing dishes after application is acceptable.) (2) The solution will dry after a while, forming a white film that allows the medication to penetrate the affected area. Before the next application, peel off this white film. *The white, softened skin will be removed along with the film. If peeling causes pain, do not force it off; simply apply another layer over the film.(3) After applying for 2 to 5 days, gently remove the film and the whitened keratinized area without causing pain. The skin will regenerate, so keep the area clean. (4) If the affected area is not completely removed, repeat the application of the solution. Especially for corns, recurrence occurs unless the core (keratin plug) is removed. Repeat the process as described in (1) to (3).(5) Apply a protective pad to the affected area as needed for protection. For corns between the toes, use a protective pad as needed to prevent the medication from adhering to unaffected skin. Also use the protective pad to alleviate pain in the affected area.-Precautions Regarding Usage and Dosage-(1) Follow the prescribed usage and dosage. (2) Avoid contact with the eyes. If the product gets in the eyes, immediately rinse with water or lukewarm water and seek prompt medical attention from an ophthalmologist. (3) When used by children, ensure it is under the supervision and guidance of a parent or guardian.(4) This product is for external use only. Do not ingest. (5) If you have multiple corns, calluses, or warts, do not apply to all affected areas at once. Apply to one or two areas at a time. Applying a large amount of solution at once may irritate the skin. (6) Use with care to avoid contact with the skin surrounding the affected area.
Salicylic acid: 0.15g per 1g Contains the following additives: hydroxypropyl cellulose, pyroxylin, lactic acid, castor oil, dl-camphor, acetone, ether, ethanol, Orange No. 403, Yellow No. 406.
1. Do not use if you have a history of hypersensitivity to salicylic acid or salicylic acid-based medications such as aspirin. 2. Do not use on the following areas: (1) Soft skin areas such as the face, around the eyes and lips, neck, or mucous membranes.(2) Inflamed or injured areas. (3) Molluscum contagiosum. (4) Warts around the anus or on the vulva. (5) Warts arranged in a line, clustered warts, or warts appearing in multiple areas on the body.
Effect
Scholls Wellness Co Dr. Scholl Gel Corn Remover 5g Liquid skin softener Effect
Product Details
Corn Remover Medicated Gel for Corns, Calluses, and Warts is a pharmaceutical product utilizing the keratolytic action of salicylic acid. Its gel formulation minimizes dripping and allows easy application to the affected area. After application, it dries to form a white film, softening thickened, hardened skin to remove corns, calluses, and warts.Before Use To open Gel Corn Remover, follow these steps: 1. Pinch the yellow spacer ring with your fingers and turn it to the left to separate the spacer ring from the tube body.2. Remove the spacer ring by turning it counterclockwise. Keeping the overcap and nozzle cap attached, hold the tube upright and screw the nozzle cap onto the tube without pressing down on the tube body. (The spacer ring can be discarded.) 3. After confirming the nozzle cap is securely attached to the tube body, remove the overcap before use.Pressing the tube body when attaching the cap may cause contents to spill. Example of Proper Gel Corn Remover Usage ~ For Corns ~ (1) Apply an appropriate amount of Gel Corn Remover to the affected area. [Fig.] For best results, use after bathing and thoroughly drying the area.(Bathing or doing water work after application is acceptable.) (2) The solution will dry after a while, forming a white film that allows the medication to penetrate the affected area. Before the next application, peel off this white film. *The white, softened skin will be removed along with the film. If peeling causes pain, do not force it off; simply apply a new layer over the existing film.(3) After applying for 2 to 5 days, gently remove the film and the whitened keratinized area without causing pain. The skin will regenerate, so keep the area clean. (4) If the affected area is not completely removed, repeat the application of the solution. Especially for corns, recurrence occurs unless the core (keratin plug) [Fig.] is removed. Repeat the process as described in (1) to (3).(5) Apply a protective pad to the affected area as needed for protection. For corns between fingers, use a protective pad as needed to prevent the medication from adhering to unaffected skin. Also use the protective pad to alleviate pain in the affected area. *The enclosed protective pad is available separately under the name -Corn Protection Pad [For Between Fingers]-.
View the Medicinal Product Information PDF
Dosage and Administration-Apply an appropriate amount to the affected area several times daily. -Usage Instructions- - For Corns (1) Apply an appropriate amount of Gel Corn Remover to the affected area. For best results, use after bathing and thoroughly drying the area.(Bathing or washing dishes after application is acceptable.) (2) The solution will dry after a while, forming a white film that allows the medication to penetrate the affected area. Before the next application, peel off this white film. *The white, softened skin will be removed along with the film. If peeling causes pain, do not force it off; simply apply another layer over the film.(3) After applying for 2 to 5 days, gently remove the film and the whitened keratinized area without causing pain. The skin will regenerate, so keep the area clean. (4) If the affected area is not completely removed, repeat the application of the solution. Especially for corns, recurrence occurs unless the core (keratin plug) is removed. Repeat the process as described in (1) to (3).(5) Apply a protective pad to the affected area as needed for protection. For corns between the toes, use a protective pad as needed to prevent the medication from adhering to unaffected skin. Also use the protective pad to alleviate pain in the affected area.-Precautions Regarding Usage and Dosage-(1) Follow the prescribed usage and dosage. (2) Avoid contact with the eyes. If the product gets in the eyes, immediately rinse with water or lukewarm water and seek prompt medical attention from an ophthalmologist. (3) When used by children, ensure it is under the supervision and guidance of a parent or guardian.(4) This product is for external use only. Do not ingest. (5) If you have multiple corns, calluses, or warts, do not apply to all affected areas at once. Apply to one or two areas at a time. Applying a large amount of solution at once may irritate the skin. (6) Use with care to avoid contact with the skin surrounding the affected area.
Salicylic acid: 0.15g per 1g Contains the following additives: hydroxypropyl cellulose, pyroxylin, lactic acid, castor oil, dl-camphor, acetone, ether, ethanol, Orange No. 403, Yellow No. 406.
1. Do not use if you have a history of hypersensitivity to salicylic acid or salicylic acid-based medications such as aspirin. 2. Do not use on the following areas: (1) Soft skin areas such as the face, around the eyes and lips, neck, or mucous membranes.(2) Inflamed or injured areas. (3) Molluscum contagiosum. (4) Warts around the anus or on the vulva. (5) Warts arranged in a line, clustered warts, or warts appearing in multiple areas on the body.
Warranty Information
If you have any issues with the products and need some assistance, please contact us through our mail or contact form within 14 days of purchase and we will make sure you are taken care of properly.A Return Merchandise Authorization (RMA) number is required for all returns.In the event that we or our carriers are responsible (Damaged during shipping, defective,...etc.), we will either ask you to return the product or send out a replacement.
